PRODUCTS LIST
- Circuit Breakers
- Mini Circuit Breakers
- Earth Leakage Circuit Breakers
- Moulded Case Circuit Breakers
- Air Circuit Breakers
- Control and protective switch
- Switching Power Supplies
- Single Output Din Rail Power Supplies
- Single Output Waterproof Power Supplies
- Single Output PFC Function Power Supplies
- Single Output Open Frame Power Supplies
- Single Output Mini-size Power Supplies
- Single Output Power Supplies
- Dual Output Power Supplies
- Triple Output Power Supplies
- Quad Output Power Supplies
- Regulator
- proximity&photoelectric switch
- proximity switch
- photoelectric switch
- distribution box
- HA
- HK
- TSM Flash
- LGD Flash
- TSM Surface
- Junction Box
- Junction Box With Rubber
- Junction Box Without Rubber
Mechanical Hygrostat
Mechanical Hygrostat thermostat /Mechanical Hygrostat/electronic hygrostat
The electromechanical hygrostat MRF012 is designed to control enclosure heaters so that the dew point is raised when a critical relative humidity of 65% is exceeded in this way condesation and corrosion is effectively prevented.
- Adjustable relative humidity
- change-over contact
- High switching capacity
- Terminals easily assessible
- Clip fixing
Technical Dat
| Switch temperature difference | 4%RH |
| permissible air velocity | 15M/sec |
| Contact type | change-over contact |
| Contact resistance | < 10mOhm |
| Service life | > 100,000 cycles |
| Max. switching capacity | 250VAC, 5 (1) A |
| DC 20W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 3-pole terminal for 2.5mm2, clamping torqure 0.5Nm max: rigid wire 2.5mm2, standed wire(with wire end ferrule)1.2mm2 |
| Mounting | clip for 35mm DIN rail, EN50022 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 38mm |
| Weight | approx. 60g |
| Fitting position | variable |
| Operating/Storage temperature | 0 to +60°C (32 to +140°F) / -4 to +176°F |
| Protection type | IP20 |
