PRODUCTS LIST
- Circuit Breakers
- Mini Circuit Breakers
- Earth Leakage Circuit Breakers
- Moulded Case Circuit Breakers
- Air Circuit Breakers
- Control and protective switch
- Switching Power Supplies
- Single Output Din Rail Power Supplies
- Single Output Waterproof Power Supplies
- Single Output PFC Function Power Supplies
- Single Output Open Frame Power Supplies
- Single Output Mini-size Power Supplies
- Single Output Power Supplies
- Dual Output Power Supplies
- Triple Output Power Supplies
- Quad Output Power Supplies
- Regulator
- proximity&photoelectric switch
- proximity switch
- photoelectric switch
- distribution box
- HA
- HK
- TSM Flash
- LGD Flash
- TSM Surface
- Junction Box
- Junction Box With Rubber
- Junction Box Without Rubber
Quad Output Power Supplies
Quad Output Power Supplies General Specification:
Specification\ Model | Q-120B | Q-120C | Q-120D | ||||||||||||||||||||||||
CH1 | CH2 | CH3 | CH4 | CH1 | CH2 | CH3 | CH4 | CH1 | CH2 | CH3 | CH4 | ||||||||||||||||
DC output voltage | 5V,11A | 12V,4A | -5V,1A | -12V,1A | 5V,10A | 15V,3.5A | -5V,1A | -15V,1A | 5V,8A | 12V,2A | 24V,2A | 12V,1A | |||||||||||||||
Wave and noise | 80mV | 120mV | 80mV | 120mV | 80mV | 150mV | 80mV | 150mV | 80mV | 120mV | 180mV | 120mV | |||||||||||||||
Inlet stability | ±0.5% | ±1% | ±1% | ±1% | ±0.5% | ±1% | ±1% | ±1% | ±0.5% | ±1% | ±1% | ±1% | |||||||||||||||
Load stability | ±0.5% | ±5% | ±5% | ±5% | ±0.5% | ±6% | ±5% | ±6% | ±0.5% | ±5% | ±5% | ±5% | |||||||||||||||
Efficiency | 77% | 76% | 80% | ||||||||||||||||||||||||
Adjustable range for DC voltage | CH1:+10, | 5% CH1:+10, | 5% CH1:+10, | ||||||||||||||||||||||||
AC input voltage range | 88~132VAC/176~264VAC selected by switch47~63Hz; 240~370VDC | ||||||||||||||||||||||||||
AC Inrush current | Cold-start current 35A/230VAC | ||||||||||||||||||||||||||
Overload proctection | 105%135% hiccup mode, auto-recovery | ||||||||||||||||||||||||||
Over-voltage protection | CH1:5.75~6.75V | ||||||||||||||||||||||||||
Setup rise hold up time | 200ms, 50ms, 20ms | ||||||||||||||||||||||||||
Withstand voltage | I/P-O/P:3KvAC, I/P-FG:1.5KvAC, O/P-FG:0.5Kv 1 minute | ||||||||||||||||||||||||||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:500VDC/100M? | ||||||||||||||||||||||||||
Working temperature | -10~+50 | ||||||||||||||||||||||||||
Safety standards | Design refer to GB4943, UL60950, EN60950 | ||||||||||||||||||||||||||
EMC standards | Design refer to GB9254, EN55022 class A | ||||||||||||||||||||||||||
Weight | 0.88Kg | ||||||||||||||||||||||||||
