SC2430 solar panel charger controller
SC2430 solar panel charger controller
New model WS-SC2440U wellsee three-stage solar controller ,continues the success of the three-stage charge and discharge.The newest feature is the large LCD display, real-time monitoring of high efficiency for charging and discharging data of voltage, current and power statistics. With USB interface, can be convinient to charge for mobile phones or tablet, three stage power can be adjusted.The new type U series products use PWM pulse width modulation technology, make it become a low loss series type charging controller.
WS-SC2440U wellsee three-stage solar controller (also called wellsee photovoltaic controller /solar charge and discharge controller ), applies in solar photovoltaic system which coordinates the working of solar panels, batteries and loads. This controller is different from other solar controllers which has advanced three -stage charging function that can make battery fully charge battery and also increase the comprehensive protective functions so that the entire system can operate efficiently and safely.
Three -stage solar controller is totally different from other controllers with three stage charging mode:it charges by battery charging characteristic curve and adopts to intelligent three steps charging mode“constant current- constant voltage and limited current-Purling floating”,It make the battery full of power and it has advanced human-machine interactive function that user can adjust charging voltage.
Three-stage charging mode (take 12V system as an example.)
- 1.Constant current fully charge stage: directly charging battery by using constant current output characteristic until the voltage of battery is up to 13.7V(can be set)
- 2. Constant voltage charge stage: controlled by PWM, the battery voltage is kept at 13.7V, till charge current is less than Purling current floating charge voltage;
- 3. Purling current floating charge stage: continue to control by PWM and keep the charge current keep in floating status until battery voltage is up to 14.2V, charging is over.
If the started voltage of battery is higher than the lowest protection voltage, the system will go to the Purling current floating charge stage automatically to prevent frequent overcharging; if started charge voltage is lower than the lowest protection voltage, the system will go to three-stage charge mode.
Three-stage charge mode uses constant current charging at the beginning and the end, and uses constant voltage charging in the intermediate stage. When the current is decayed to the set value, it switches from the second stage to the third stage. This mode can make the outlet minimum to protect the battery better and really charge the battery fully.
WS-SC2440U Wellsee three-stage solar controller applies to all types of solar panel and lead-acid batteries (Other types of batteries could customize charging curve according to the users) . Adopting industrial grade MCU (Micro processing controller) has PWM (Pulse Width Modulation) program with variable duty cycle functions. It can provide fast and best charging voltage and current from the PV panel according to different types of batteries and charging state.
- •Cpu control with LCD display,
- •USB port for charging your mobile phone or tablet.
- •Three stages charging mode”constant current—constant voltage and limited current—purling floating”
- •Automatic recognition of input voltage
- •Applying with various types of durable batteries
- •Micro processing controller pulse modulation wide-frequency PWM charge
- •Battery voltage can be set when low voltage cut or load connection recover
- •Temperature sensor for charging a battery in compensation.
- •Keep the battery in full stage
- •protection circuit of PV from reverse-charging
- •Overload protection
- •short circuit protection
- •Reverse discharge protection
- •Reverse polarity connection protection
- •Reverse battery connection protection
- •Thunder protection
- •Low voltage protection
- •overcharge protection
- •Restore settings when load start
- •Intelligent temperature compensation
|Model||WS-SC2440U 20A||WS-SC2440U 30A||WS-SC2440U 40A|
|Rated voltage||12V/24V /48V Automatic voltage recognition|
|Max load current||20A||30A||40A|
|Input voltage range||
12V~20V / 24V~40V / 48V~80V
|Length≤1m charge loop drop||
|Length≤1m discharge loop drop||
|Over voltage protection||
17V / 34V / 68V
|Full charge voltage||
13.7V~14.4V / 27.4V~28.8V / 54.8V~57.6V
|Low voltage cut||
10.5~11V / 21V~22V / 42V~44V
|USB charge port||
5V / 1.2A
|No load loss||
|Max wire area||
Yueqing Kampa Electric Co.,Ltd. is Established in 1990.Has variety of goods ,such as Relay,Circuit breaker,Switches,Thermocouple,Thermostat,Temperature controller,Switch power supply,AVS,Hea sink,Heater,Distribution box,Junction box and so on.We are manufacturer and have ten years experience in Electrical industry.